Jutlandia

Nieuwe alinea

Commercial vessels

Jutlandia


scroll

↓


Nieuwe alinea



Awatea is a motor yacht with a length of 45.0m. The yacht's builder is Royal Hakvoort from the Netherlands who delivered Awatea in 2008. The superyacht has a beam of 8.79m, a draft of 2.95m and a volume of 499 GT.

The Awatea, previously named My Trust Fund, features exterior design by Cor D. Rover Design, while her interior was penned by Felix Buytendijk Yacht Design, with naval architecture by Diana Yacht Design B.V.. Up to 10 guests are accommodated on board the superyacht Awatea, and she also has accommodation for 9 crew members including the captain of Awatea. The yacht Awatea has a steel hull and aluminium superstructure.


She is powered by 2 Caterpillar Inc engines, which give her a cruising speed of 11.3 kn and a top speed of 13.4 kn. The yacht carries 64,000 liters of fuel on board, and 15,000 liters of water.


Jutlandia


MS Jutlandia (lat.: Jutland) was contracted by and built for the East Asiatic Company (EAC) in 1934, as a combined passenger and cargo ship at EAC's Nakskov Shipyard, Denmark. Following an extended operational life in which she also served as a hospital ship and a royal yacht, she was finally decommissioned in 1965.


Jutlandia was contracted by EAC 1934 to replace older ships on the then regular service between Copenhagen and Bangkok. She operated on this route from November 1934, until January 1940, and again from 1954 to the end of 1964. Jutlandia was the only ship in the EAC fleet to be designed with a Maierform bow. She is the second of so far three ships of the same name.


Jutlandia served as a hospital ship during the Korean war from 1951-1952 and later on was also used as a Royal Yacht in 1960 before being discommissioned in 1964. For more detailed info


This is by far the biggest ship model delivered by KONAJRA measuring 325 cm in lenght an due to all the details using over 90,000 bricks. The model was specifaccly designed for LEGO World Copenhagen in 2015 and is now, after being on show on 2 other LEGO® events is now on permanent display in the new LEGO® headquaters ( the LEGO Campus) in Billund, Danmark


The digital design has never been finished due to a lack of time. Maybe someday when there is time it will be, just to render images for our website





Commissiond by

Owners Of M/Y Acala, Mexico


Scale

1/57

Length

70cm


Built in

2023

Acala is a 43,1 m Motor Yacht, built in Italy by Cantiere delle Marche and delivered in 2022. Her top speed is 14.0 kn and her cruising speed is 12.0 kn. She can accommodate up to 12 guests in 6 staterooms. She has a gross tonnage of 450.0 GT and a 8.6 m beam.


The yacht is the first example of the shipyards collaboration with Horacio Bozzo Design who penned her exterior lines. Her interior has been penned by Mexican architect Simon Hamui, while her naval architecture comes from the boards of Hydro Tec S.r.l. The yacht is spread across three decks, as well as a sundeck and the yacht can accommodate as many as 12 guests between six ensuite staterooms. The master suite is on the main deck, where the forward part of the yacht is dedicated to the owner and family. There are also three VIP suites, while two twins are located on the lower deck.


The social spaces include the main deck saloon, as well as a panoramic sky lounge on the upper deck where the dining area is location. The large sundeck features a cockpit, pool and lounge area. She has twin Caterpillar C32 Acert engines of 746kW each, and a range of above 5,000 nautical miles at 10 knots and a top speed of 14 knots.

Acala is a 43,1 m Motor Yacht, built in Italy by Cantiere delle Marche and delivered in 2022. Her top speed is 14.0 kn and her cruising speed is 12.0 kn. She can accommodate up to 12 guests in 6 staterooms. She has a gross tonnage of 450.0 GT and a 8.6 m beam.


The yacht is the first example of the shipyards collaboration with Horacio Bozzo Design who penned her exterior lines. Her interior has been penned by Mexican architect Simon Hamui, while her naval architecture comes from the boards of Hydro Tec S.r.l. The yacht is spread across three decks, as well as a sundeck and the yacht can accommodate as many as 12 guests between six ensuite staterooms. The master suite is on the main deck, where the forward part of the yacht is dedicated to the owner and family. There are also three VIP suites, while two twins are located on the lower deck.


The social spaces include the main deck saloon, as well as a panoramic sky lounge on the upper deck where the dining area is location. The large sundeck features a cockpit, pool and lounge area. She has twin Caterpillar C32 Acert engines of 746kW each, and a range of above 5,000 nautical miles at 10 knots and a top speed of 14 knots.

Share by: